Âé¶¹ÒùÔº


Imaging high explosive detonators

Imaging high explosive detonators
A 3-D rendering of an exploding foil initiator. Credit: Lawrence Livermore National Laboratory

Lawrence Livermore National Laboratory (LLNL) scientists and collaborators at Los Alamos National Laboratory (LANL) for the first time have taken 3-D snapshots of operating high explosive detonators.

Scientists from LLNL, Los Alamos and National Security Technologies, LLC (NSTech) combined state-of-the-art imaging capabilities with computed tomographic reconstruction (X-ray cross sectional imaging) in experiments performed at the Argonne National Laboratory's Advanced Photon Source to generate 3-D snapshots of exploding foil initiators.

Exploding foil initiators (EFI), also known as slapper detonators, offer safety and timing advantages over other means of initiating high explosives. However, understanding how detonators perform is challenging.

EFI is an improvement of the earlier exploding-bridgewire detonator. Instead of directly coupling the shock wave from the exploding wire, the expanding plasma from an explosion of a metal foil drives another thin plastic or metal foil called a "flyer" or a "slapper" across a gap, and its high-velocity impact on the explosive then delivers the energy and shock needed to initiate a detonation.

"The rich imaging data on EFI and flyer microstructure with time represent a new opportunity to refine the understanding of flyer operation of slapper detonators," said LLNL's Trevor Willey, a co-author of the research. "Parameters can be tuned to achieve optimal performance. The data will aid in understanding the initiation mechanism for slapper detonators."

The research is important for assessing aging margins, safety and performance, and in developing new and improved designs.

During the experiment, a LANL/NSTech-developed four-camera system acquired four images from successive X-ray pulses from each shot. The first frame was prior to bridge burst. The second images the flyer about 0.16 millimeters (mm) above the surface, but edges of the and/or flyer are still attached to the substrate. The third frame captures the flyer in flight, while the fourth shows a completely detached flyer in a position that is typically beyond where slappers strike initiating explosives. The researchers then used the recently developed Livermore Tomography Tools to reconstruct 3-D images of operating flyers.

The technique is now being used to support several ongoing programmatic efforts within LLNL.

The research appears in the Journal of Applied Âé¶¹ÒùÔºics .

More information: T. M. Willey et al. X-ray imaging and 3D reconstruction of in-flight exploding foil initiator flyers, Journal of Applied Âé¶¹ÒùÔºics (2016).

Citation: Imaging high explosive detonators (2017, March 8) retrieved 7 May 2025 from /news/2017-03-imaging-high-explosive-detonators.html
This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Explore further

Five of the most explosive non-nuclear chemicals ever made

195 shares

Feedback to editors