麻豆淫院

What if we could transform harmful pollution into a helpful energy source? As we strive towards carbon neutrality, researching energy innovations that reduce pollution is crucial.

Researchers at Tohoku University, Hokkaido University, and AZUL Energy, Inc. developed a streamlined process for converting carbon dioxide (CO₂) into carbon monoxide (CO)鈥攁 key precursor for synthetic fuels.

Their method achieved record-breaking efficiency, cutting down the required time from 24 hours to just 15 minutes. The study is in the journal Advanced Science.

"CO₂-to-CO conversion is currently a hot topic to address climate change, but the conventional techniques had major pitfalls that we wanted to address," remarks Liu Tengyi (WPI-AIMR at Tohoku University). "The materials were expensive, unstable, had limited selectivity, and took long to prepare. It just wouldn't be feasible to use them in an actual industrial setting."

With industrial standards in mind, the researchers selected various phthalocyanines (Pc) expected to improve performance [metal-free (H鈧侾c), iron (FePc), cobalt (CoPc), nickel (NiPc), and copper (CuPc)]. These were sprayed onto gas diffusion electrodes to directly form crystalline layers of the phthalocyanines on the electrode surface. Ultimately, CoPc鈥攁 low-cost pigment and metal complex鈥攕howed the highest efficiency in converting CO鈧� to CO.

This graffiti-like method of simply spraying the catalyst on a surface reduces the typical processing time down to a mere 15 minutes. Conventional methods require a tedious process of mixing conductive carbon and binders, drying, and heat treatment over 24 hours.

Furthermore, under a current density of 150 mA/cm虏, the new system maintained stable performance for 144 hours. Using the DigCat Database (the largest experimental electrocatalysis database to date), the researchers confirmed that their catalyst surpassed all previously reported Pc-based catalysts.

"Not only is this the best Pc-based catalyst for producing CO to date, but it successfully exceeds the industrial standard thresholds for its reaction rate and stability," remarks Liu. "It's the first ever to make the cut."

To investigate the reasons behind this high performance, the team conducted structural analysis using synchrotron radiation at the NanoTerasu facility, along with theoretical calculations. The results suggest that the crystallization led to densely packed molecules, which facilitated efficient electron transfer to the surface. These findings highlight that direct crystallization is an effective strategy for fabricating metal complex-based catalyst electrodes for CO鈧� electroreduction.

The gas diffusion electrode fabrication method developed in this study, along with the CO鈧� electrolysis technology, offers a promising pathway for synthesizing carbon monoxide (CO), an important intermediate for synthetic fuels, from CO鈧� with high efficiency using low-cost pigment-based catalysts.

This approach addresses one of the key bottlenecks in synthetic fuel production by improving energy efficiency and reducing costs associated with CO鈧� utilization. As such, it holds great potential as a next-generation technology for carbon dioxide capture and utilization (CCU).